|
|
|
|
| |
 |
| HI-G1080 |
|
|
| |
|
| |
Injection machine, plastic injection molding machine manufacturer--China Hisson plastic machinery co., ltd. We are professional injection machine, plastic injection molding machine manufacturer and injection machine, plastic injection molding machine factory in China. We can produce injection machine, plastic injection molding machine according to your requirements. More types of injection machine, plastic injection molding machine wanted, please contact us right now!
|
| |
HI-G1080 |
Optional Parameters |
TECHNICAL PARAMETER TABLE |
Unit |
A |
B |
C |
D |
INJECTION
UNIT
|
SCREW DIAMETER |
mm |
100 |
110 |
120 |
130 |
SCREW L/D RATIO |
L/D |
24.2 |
22 |
20.2 |
18.6 |
SHOT VOLUME(THEORETICAL) |
cm3 |
3770 |
4562 |
5429 |
6371 |
INJECTION WEIGHT(PS) |
g |
3431 |
4151 |
4940 |
5798 |
| INJECTION PRESSURE |
Mpa |
211 |
174 |
146 |
125 |
| INJECTION RATE |
g/s |
660 |
799 |
951 |
1116 |
| PLASTICIZING CAPACITY |
g/s |
88.3 |
100.8 |
120 |
140.8 |
| SCREW SPEED |
rpm |
110 |
CLAMPING
UNIT
|
CLAMP FORCE |
kN |
10800 |
| OPEN STROKE |
mm |
1160 |
| MAX.MOULD HEIGHT |
mm |
12800 |
| MIN.MOULD HEIGHT |
mm |
450 |
SPACE BETWEEN TIE BARS
|
mm |
1100×1100 (W×H) |
| EJECTOR FORCE |
KN |
260 |
| EJECTOR STROKE |
mm |
330 |
| GENEREL |
EJECTOR NUMBER |
n |
21 |
| PUMP PRESSURE |
KW |
16 |
| PUMP MOTOR POWER |
KW |
45+45 |
| HEATING POWER |
KW |
68.45 |
| MACHINE DIMENSION |
m |
12.3×2.9×4.2(L×W×H) |
| MACHINE WEIGHT |
T |
60 |
|
| |
|
| |
air compressors, water chiller, air cooled water chillers, air dryers, air filters, auto loaders, cooling towers, crushers, hopper dryer, dehumidifying dryers, dehumidifying dryer, water cooled chiller, industrial water chillers, plastic blow molding machine, blow mold machines, blow molding machine, blow moulding machines, extrusion machine, plastic extrusion machines, injection machine, plastic injection molding machines, injection mold machine, injection molding machines, injection moulding machine, plastic injection machines, blow mould, injection blow moulds, cap mold, cap moulds, blow mold, injection blow molds, plastic injection mold, injection molds, preform mold, preform moulds, plastic machine
|
|
