|
|
|
|
| |
 |
| HST-5L |
|
| |
|
| |
| Max Product Volume |
(L) |
2 |
| Dry cycle |
(pc/h) |
900×2 |
| Screw Diameter |
(mm) |
60 |
| Screw L/D ratio |
(L/D) |
22～30 |
| Screw drive power |
(KW) |
15～18.5 |
| Screw heating capacity |
(KW) |
5.04～6.7 |
| No.of heating zone |
(ZONE) |
3～4 |
| Output of HDPE |
(kg/h) |
65～80 |
| Output of PVC |
(kg/h) |
70～85 |
| Oil pump drive power |
(KW) |
5.5 |
| Clamping force |
(KN) |
37 |
| Platen distance |
(mm) |
138～368 |
| Max.Size of Mold |
(W×H)(mm) |
300×320 |
| Capacity |
(L) |
|
| Max.Die diameter |
(mm) |
90 |
| Die heat capacity |
(KW) |
1.8 |
| No.of heating zone |
(ZONE) |
3 |
| Central distance of bi-die |
(mm) |
130 |
| Max.Die diameter(Bi-head) |
(mm) |
55 |
| No.of heating zone |
(ZONE) |
3 |
| Heating capacity |
(KW) |
2.3 |
| Blowing pressure |
(Mpa) |
0.6 |
| Air volume |
(M3/MIN) |
0.4 |
| Cooling water pressure |
(Mpa) |
0.2～0.3 |
| Water consumption |
(L/MIN) |
50 |
| Size of machine |
(L×W×H)(m) |
2.7×1.89×2.5 |
| Weight of machine |
(TON) |
4.2 |
|
 |
| |
1、Electrical control system: The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2、Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3、Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4、Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5、Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6、Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.
|
| |
 |
| |
|
air compressors, water chiller, air cooled water chillers, air dryers, air filters, auto loaders, cooling towers, crushers, hopper dryer, dehumidifying dryers, dehumidifying dryer, water cooled chiller, industrial water chillers, plastic blow molding machine, blow mold machines, blow molding machine, blow moulding machines, extrusion machine, plastic extrusion machines, injection machine, plastic injection molding machines, injection mold machine, injection molding machines, injection moulding machine, plastic injection machines, blow mould, injection blow moulds, cap mold, cap moulds, blow mold, injection blow molds, plastic injection mold, injection molds, preform mold, preform moulds, plastic machine
|
|
