Click to get the introduction of
>> Manual Preform Imputting Auto Blow Moulding Machines
>> PET Semi-Automatic Bottle Blowing Machines
>> PET Fully-automatic Blow Moulding Machines
| Precision Parts | Diehead System | HST-2L | HSTⅡ-2L| HST-5L| HSTⅡ-5L|
HST-12L | HSTⅡ-12L | HSTⅡ-30L | HSB-25A/B | HSB-25APC | HSB-50A/B |
HSB-80A/B | HSB-160A/B | HSB-250L | HBFSII-5L/2 |
 
blow molding machines
HSB-25APC
 
 
Max Product Volume (L) 25
Dry cycle (pc/h) 600
Screw Diameter (mm) 82
Screw L/D ratio (L/D) 38
Screw drive power (KW)  
Screw heating capacity (KW)

16.7
No.of heating zone (ZONE) 8
Output of HDPE (kg/h) 160(PC)
Output of PVC (kg/h)  
Oil pump drive power (KW) 45
Clamping force (KN) 215
Platen distance (mm) 350～780
Max.Size of Mold (W×H)(mm) 550×650
Capacity (L) 1.9
Max.Die diameter (mm) 150
Die heat capacity (KW) 4.1
No.of heating zone (ZONE) 4
Central distance of bi-die (mm)  
Max.Die diameter(Bi-head) (mm)  
No.of heating zone (ZONE)  
Heating capacity (KW)  
Blowing pressure (Mpa) 1.2
Air volume (M3/MIN) 1.0
Cooling water pressure (Mpa) 0.3
Water consumption (L/MIN) 150
Size of machine (L×W×H)(m) 6.3×2.2×4.55
Weight of machine (TON) 11.8
 

1.Electrical control system:The machine works under the PLC control(made by the Mitsubishi Co.of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type colour screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed on the touch-type colour screen,The electric elements work on the non-contact working principle,thus being durable in service life.

2.Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.

3.Plastic parison system:The plastic parisons are produced under the control of a 30-points wal-thickness controller made by the Japanese MOOG Co.

4.Plasticizing system:Plastics are plasticized and mixed by a high-performance screw,and the air can be exhausted by the screw as well.The drive to the screw is transmitted from a hydraulic motor at an infinitely variable speed.Aresistor rule is used to control the plastic injection at high accuracy.

5.Mould opening & closing mechanism:The mechanism for opening & closing the mould halves and locking the mould travels on linear spherical ball guideways. The traveling accuracy can be controlled within microns.The mould opening & closing mechanism features in high positioning accuracy, easy movement and energy saving.And the mechanism is free of deformation under heavy workload.Patent product:Two draw rods and a single hydraulic pump can be synchronously actuated in two directions to open & close the mould halves and to lock the mould at its center.So the mechanism features in consistent working performance.

6.Mould head:The mould head used on the machine is a special PC-controlled mould head.The mould head is of vertical design and works at a sequence of first-in and first-out.The mould head is made of special steel and treated by the nitriding method..

7.Air-blowing system:The air-blowing system is equipped with two air filters and an air pressure regulator to assure air cleanliness and constant air pressure for the air circuit.The air-blowing system is arranged with maintenance-free SMC solenoid air valves.

 
 
 
| Precision Parts | Diehead System | HST-2L | HSTⅡ-2L| HST-5L| HSTⅡ-5L|
HST-12L | HSTⅡ-12L | HSTⅡ-30L | HSB-25A/B | HSB-25APC | HSB-50A/B |
HSB-80A/B | HSB-160A/B | HSB-250L | HBFSII-5L/2 |
Click to get the introduction of
>> Manual Preform Imputting Auto Blow Moulding Machines
>> PET Semi-Automatic Bottle Blowing Machines
>> PET Fully-automatic Blow Moulding Machines